Configuration Wizard; Software Update - TechniSat Transita 121 IR Operating Instructions Manual

Skip WPS option to enter the password manually.
> To view further information about the current connection, select [Show Settings].
> Select [Manual Settings] if you know your network parameters and want to
configure them manually. Pay attention to the information on the display.
> Select [Delete network profile] to delete connection settings that are no longer
needed. All network settings can be reset in [Reset Settings].
> Under [NetRemote PIN], you can set up a PIN for remote access (e.g. via
TechniSat CONNECT).
> Select [Allow Wi-Fi connection in standby mode] if you want the Wi-Fi connection to
remain in standby mode. This setting increases power consumption, but allows
control via the TechniSat CONNECT app.

15.8 configuration wizard

> Press the MENU button, then select [Main menu] > [System settings] > [Configuration
wizard].
When you turn it on for the first time, the configuration wizard starts automatically.
> First select the language of the display, and when the display shows [Execute now],
> [YES].
If you select [NO], the wizard will end and you will need to manually
enter the necessary settings.
You will now be guided step by step through the settings.
> Under Time format, select the desired time display format (chapter 15.2).
> In the next step, you need to select from which source you want to synchronise the
time (see section 15.2 for more information).
> Then select the current time zone and whether it is summer or winter time.
> Press the OK/SNOOZE knob to end the wizard when the Configuration Wizard
completed message appears on the display.
15.9 Update software
From time to time, this may happen Software updates are provided, which may include
improvements or bug fixes. This ensures that the device is always up to date. An Internet
connection is required for this.
> Press the MENU button, then select [System Settings] > [Software Update].
> Select [Automatic update] if you want the device to periodically check for new
software versions.
Seite 27