Visual Display; Switching Off The Device; Menu Operation - TechniSat Digitradio 361 CD IR User Manual

4.5 Visual display

Current
source
Info area

4.6 Switching off the device

> You can use the On/Standby button (1) on the device or on the remote control (1) to switch the device to
standby mode; the time appears. After approx. 10 seconds the display brightness dims.

5 Menu operation

The menu is divided into the menu corresponding to the currently selected source, the main menu, plus the
respective submenus featured therein. Navigation in the different menus can be performed using both the
remote control and the device.
> By pressing the MENU button on the remote control (4) or by holding it down (approx. 2 seconds) on the
device (6), you can retrieve the menu and exit it again.
30
Time
Status bar