Setting Cifs User Permissions - Avid Technology NEXIS File Gateway Setup And User Manual

5. With a User Name selected, type or select the name of the workspace you want to be displayed to
the client in the Workspace Name text box.
6. In the CIFS Share Name field, enter a name for the shared workspace; it does not have to match
the actual workspace name. For example, in the figure above, the CIFS share name WS2 maps to
the actual path: \\SRL\workspace2.
7. Click Add CIFS.
8. Continue with

Setting CIFS User Permissions

You can set permissions for users (to access multiple workspaces), or for workspaces (to make them
accessible by multiple users).
To set CIFS user permissions to multiple workspaces:
1. Open the Configuration Editor (if not already open) — Click Start > Programs > Avid > Avid
NEXIS File Gateway and select Configuration Editor.
2. Click User View.
3. Select a user in the left pane and one or more workspaces in the right pane.
4. Set the permissions using the Access Selection menu:
- None — no access
- Full — read, change, and full control
- Read — read permission
- Read/Write — read and write permission
5. Click Set Access.
6. Click Save.
7. Quit the application.
To make a workspace accessible to multiple users:
1. Open the Configuration Editor (if not already open) — Click Start > Programs > Avid > Avid
NEXIS File Gateway and select Configuration Editor.
2. Click CIFS Share View.
3. Select a workspace in the left pane and one or more users in the right pane.
4. Set the permissions using the Access Selection menu:
- None — no access
- Full — read, change, and full control
- Read — read permission
- Read/Write — read and change permission
5. Click Set Access.
6. Repeat steps 3 through 5 until permissions have been set for all workspaces.
7. Click Save.
8. Quit the application.
"Setting CIFS User Permissions" on page
32
Adding Users and Setting Permissions
32.