Configuring The Server For Cifs Access; Setting The Client Manager Preferences - Avid Technology NEXIS File Gateway Setup And User Manual

4

Configuring the Server for CIFS Access

This chapter describes how to configure the File Gateway server to use Common Internet File
System (CIFS) and other Avid NEXIS shared storage hardware. The Avid NEXIS and CIFS clients
share traffic on the same network port on the back of the server.

Setting the Client Manager Preferences

Set up the Client Manager for separate Avid NEXIS and CIFS_FTP Traffic in the Client Manager
Preferences.
n
Whenever the File Gateway server is restarted the Client Manager software does not automatically
restart. This is not the typical Client Manager software behavior. This change in behavior is set in the
Avid NEXIS File Gateway software.
To set the Client Manager preferences:
1. Start Client Manager by doing one of the following:
t
Click the Client Manager icon in the Windows taskbar
t
Click Start > Programs > Avid > Avid NEXIS Client > Avid NEXIS Client Manager
The Avid NEXIS Client Manager opens.
2. Click the Network Interface Settings button.