Table of Contents
Advertisement
9. Right-click the Avid NEXIS Traffic connection and select Properties.
a. In the Properties dialog box, double-click Internet Protocol version 4 (TCP/IPv4).
b. Select "Use the following IP address:" and enter the following:
— An IP address (172.20.115.13 used in the following example)
— A subnet mask (255.255.255.255 used in the following example)
— No default gateway
c. Select "Use the following DNS server addresses:" and enter the following:
— Preferred DNS server (172.20.110.5 used in the following example)
— Alternate DNS server (172.16.4.235 used in the following example)
d. Click OK.
10. Click OK to save the change and close the Properties dialog box.
11. Right-click the CIFS_FTP Traffic connection and select Properties.
12. Verify that "File and Printer Sharing for Microsoft Networks" is selected for the CIFS_FTP
Traffic connection.
File Gateway Server Settings for CIFS, FTP, and Avid NEXIS Traffic
Configure the following for the CIFS and FTP Ethernet port on the File Gateway server:
CIFS and FTP Traffic
•
Default gateway
•
Primary network port (top of binding order)
•
Unique DNS hostname
•
Name (for example, FileGW-cifs.avid-lab.com)
•
IP address
Avid NEXIS Traffic
•
No default gateway
•
Unique DNS hostname
•
Name (for example, FileGW-NEXIS.avid-
lab.com)
•
IP address
24
Network Connection
Advertisement
Table of Contents
Need help?
Do you have a question about the NEXIS File Gateway and is the answer not in the manual?
Questions and answers