Basic Midi Settings - Yamaha 007POTO-G0 Owner's Manual

Basic MIDI settings

Here's how to select the type of MIDI messages the LS9 will transmit and receive, the MIDI port
that will be used, and the MIDI channel.
1
In the DISPLAY ACCESS section, press the
[SETUP] key repeatedly to access the MISC
SETUP screen within the SETUP screens.
MIDI SETUP popup button
2
Move the cursor to the MIDI SETUP popup
button, and press the [ENTER] key to
access the MIDI SETUP popup window.
1
4
6
8
9
In the MIDI SETUP page you can select the type of
MIDI messages that will be transmitted and received,
and choose the port that will be used. This page
includes the following items.
1 PORT/CH field
Here you can select the port and MIDI channel that
will be used to transmit and receive MIDI messages. If
MIDI messages are being transmitted or received, the
SIGNAL indicators at the top of this field will light.
B Port select box
Use the dial or the [DEC]/[INC] keys to select the
MIDI message transmit (Tx) port and receive (Rx)
port. If you select the same port as used by another
function such as cascade link or HA remote, a confir-
mation dialog box will appear. If you select OK, the
port setting for the other function will be disabled.
178
LS9-16/32 Owner's Manual
Basic MIDI settings
2 3 5
C Channel select box
Use the dial or the [DEC]/[INC] keys to select the
MIDI message transmit (Tx) channel and receive (Rx)
channel.
D PROGRAM CHANGE field
Here you can make settings for program change trans-
mission and reception.
●
Tx button
Switches program change transmission on/off.
●
Rx button
Switches program change reception on/off.
●
ECHO button
This selects whether incoming program changes
are echoed-out from the transmission port.
HINT
• For details on how to assign the scene or effect for each pro-
gram number, refer to "Using program changes to recall
scenes and library items" ( → p. 180).
E PROGRAM CHANGE MODE field
Here you can select the program change transmit/
receive mode.
7
●
SINGLE button
If this button is on, program changes will be trans-
mitted and received on a single MIDI channel.
●
OMNI button
If this button is on, program changes of all MIDI
channels will be received in Single mode. (Multi
mode transmission/reception and Single mode
transmission are disabled.)
●
BANK button
If this button is on, bank select messages can be
transmitted and received in Single mode. (This is
disabled for Multi mode transmission/reception.)
●
MULTI button
If this button is on, program changes will be trans-
mitted/received on multiple MIDI channels (Multi
mode).
F CONTROL CHANGE field
Here you can make settings for control change trans-
mission/reception.
●
Tx button
Switches control change transmission on/off.
●
Rx button
Switches control change reception on/off.
●
ECHO button
This selects whether incoming control changes are
echoed-out from the transmission port.