Table of Contents
Advertisement
1.4 PROGRAM CHANGE
Reception
If [PROGRAM CHANGE ECHO] is ON, bank select messages will also be
echoed from MIDI OUT.
If SINGLE CH is selected, these messages are received if [PROGRAM CHANGE
Rx] is ON and the [Rx CH] matches. However if [OMNI] is ON, these messages
are received regardless of the channel. When these messages are received, scene
memory and effect library are recalled according to the settings of the
[PROGRAM CHANGE EVENT LIST].
Transmission
If [PROGRAM CHANGE Tx] is ON, these messages are transmitted according
to the [PROGRAM CHANGE Table] settings when scene memory and effect
library are recalled.
If SINGLE CH is selected, these messages are transmitted on the [Tx CH]
channel.
If the recalled scene memory and effect library has been assigned to more than
one PROGRAM NUMBER, the lowest-numbered PROGRAM NUMBER for
each MIDI channel will be transmitted.
PROGRAM CHANGE messages are not used for transmission to LS9 Editor
because there is no guarantee that the contents of the assignment tables will
match. (PARAMETER CHANGE messages are always used.)
You can choose either MULTI MIDI CH or SINGLE CH.
If SINGLE is selected
You can choose the Rx CH, OMNI CH, and Tx CH.
You can choose whether a bank select message will be added.
A bank of up to 16 can be specified.
If MULTI is selected
The Rx and Tx channels will be the same.
The assignment table will use the settings for each MIDI channel. Bank select
messages will not be added.
You can make settings for up to sixteen MIDI channels.
Program change
STATUS
1100nnnn Cn
Program number (0-127)
DATA
0nnnnnnn nn
2 SYSTEM REALTIME MESSAGE
2.1 SONG SELECT
Select the track number shown in the TITLE LIST screen of the USB memory
recorder.
Song select
STATUS
11110011 F3
Song number (0-127)
Song number 0sssssss ss
2.2 TIMING CLOCK
Reception
This message is used to control effects. This message is transmitted twenty-four
times per quarter note.
Echoing of this message depends on the OTHER item in the ECHO settings.
Timing clock
STATUS
11111000 F8
2.3 ACTIVE SENSING
Reception
Once this message has been received, MIDI communication will be initialized
(e.g., Running Status will be cleared) if no message is received for an interval of
400 ms.
This message is not subject to echoing.
Active sensing
STATUS
11111110 FE
2.4 SYSTEM RESET
Reception
When this message is received, MIDI communication will be initialized (e.g.,
Running Status will be cleared).
This message is not subject to echoing.
System reset
STATUS
11111111 FF
(Cn)
3 SYSTEM EXCLUSIVE MESSAGE
3.1 MMC
< MMC STOP >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message and stops.
STATUS
ID No.
Device ID
COMMAND
EOX
< MMC PLAY >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message and starts playback.
STATUS
ID No.
Device ID
COMMAND
EOX
< MMC DEFERED PLAY >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message and starts playback.
STATUS
ID No.
Device ID
COMMAND
EOX
(F3)
< MMC RECORD STROBE >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message, and if stopped,
starts recording.
STATUS
ID No.
(F8)
Device ID
COMMAND
EOX
< MMC PAUSE >
Reception
If the [DEVICE NO.] matches or is 7F, receives this message, and if playing,
(FE)
pauses.
STATUS
ID No.
Device ID
COMMAND
EOX
(FF)
System exclusive message
11110000 F0
Real time System exclusive
01111111 7F
Destination (00-7E, 7F:all call)
0ddddddd dd
Machine Control Command(MCC) sub-id
00000110 06
Stop(MCS)
00000001 01
End of exclusive
11110111 F7
System exclusive message
11110000 F0
Real time System exclusive
01111111 7F
Destination (00-7E, 7F:all call)
0ddddddd dd
Machine Control Command(MCC) sub-id
00000110 06
Play(MCS)
00000010 02
End of exclusive
11110111 F7
System exclusive message
11110000 F0
Real time System exclusive
01111111 7F
Destination (00-7E, 7F:all call)
0ddddddd dd
Machine Control Command(MCC) sub-id
00000110 06
Deferred Play(MCS)
00000011 03
End of exclusive
11110111 F7
System exclusive message
11110000 F0
Real time System exclusive
01111111 7F
Destination (00-7E, 7F:all call)
0ddddddd dd
Machine Control Command(MCC) sub-id
00000110 06
Record strobe
00000110 06
End of exclusive
11110111 F7
System exclusive message
11110000 F0
Real time System exclusive
01111111 7F
Destination (00-7E, 7F:all call)
0ddddddd dd
Machine Control Command(MCC) sub-id
00000110 06
Pause(MCS)
00001001 09
End of exclusive
11110111 F7
LS9-16/32 Owner's Manual
MIDI Data Format
261
Advertisement
Table of Contents
