Yamaha 007POTO-G0 Owner's Manual page 234

Effects Parameters
■ MOD. DELAY
One input, two output basic repeat delay with modulation.
Parameter Range
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine/Tri
THRU, 21.2 Hz–
HPF
8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
SYNC OFF/ON
*1
DLY.NOTE
MOD.NOTE *2
*1.
(Maximum value depends on the tempo setting)
*2.
■ DELAY LCR
One input, two output 3-tap delay (left, center, right).
Parameter Range
DELAY L 0.0–2730.0 ms
DELAY C 0.0–2730.0 ms
DELAY R 0.0–2730.0 ms
FB. DLY 0.0–2730.0 ms
LEVEL L –100 to +100%
LEVEL C –100 to +100%
LEVEL R –100 to +100%
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
THRU, 21.2 Hz–
HPF
8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
SYNC OFF/ON
NOTE L *1
NOTE C
*1
NOTE R
*1
NOTE FB
*1
*1.
(Maximum value depends on the tempo setting)
234
LS9-16/32 Owner's Manual
Description
Delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Modulation waveform
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO
to determine DELAY
Used in conjunction with TEMPO
to determine FREQ
Description
Left channel delay time
Center channel delay time
Right channel delay time
Feedback delay time
Left channel delay level
Center channel delay level
Right channel delay level
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Tempo parameter sync on/off
Used in conjunction with TEMPO
to determine DELAY L
Used in conjunction with TEMPO
to determine DELAY C
Used in conjunction with TEMPO
to determine DELAY R
Used in conjunction with TEMPO
to determine FB. DLY
■ ECHO
Two input, two output stereo delay with crossed feedback
loop.
Parameter Range
DELAY L 0.0–1350.0 ms Left channel delay time
DELAY R 0.0–1350.0 ms Right channel delay time
FB.DLY L 0.0–1350.0 ms Left channel feedback delay time
FB.DLY R 0.0–1350.0 ms Right channel feedback delay time
Left channel feedback gain (plus
values for normal-phase feedback,
FB. G L –99 to +99%
minus values for reverse-phase
feedback)
Right channel feedback gain (plus
values for normal-phase feedback,
FB. G R –99 to +99%
minus values for reverse-phase
feedback)
Left to right channel feedback
gain (plus values for normal-phase
L→R FBG –99 to +99%
feedback, minus values for
reverse-phase feedback)
Right to left channel feedback
gain (plus values for normal-phase
R→L FBG –99 to +99%
feedback, minus values for
reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
THRU, 21.2 Hz–
HPF High-pass filter cutoff frequency
8.00 kHz
50.0 Hz–16.0 kHz,
LPF Low-pass filter cutoff frequency
THRU
SYNC OFF/ON Tempo parameter sync on/off
Used in conjunction with TEMPO
*1
NOTE L
to determine DELAY L
Used in conjunction with TEMPO
NOTE R
*1
to determine DELAY R
Used in conjunction with TEMPO
NOTE FBL
*1
to determine FB. D L
Used in conjunction with TEMPO
NOTE FBR
*1
to determine FB. D R
*1.
(Maximum value depends on the tempo setting)
■ CHORUS
Two input, two output chorus effect.
Parameter Range
FREQ. 0.05–40.00 Hz Modulation speed
AM DEPTH 0–100% Amplitude modulation depth
PM DEPTH 0–100% Pitch modulation depth
MOD. DLY 0.0–500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
SYNC OFF/ON Tempo parameter sync on/off
Used in conjunction with TEMPO
*1
NOTE
to determine FREQ.
LSH F 21.2 Hz–8.00 kHz Low shelving filter frequency
LSH G –12.0 to +12.0 dB Low shelving filter gain
EQ F 100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0–0.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz–16.0 kHz High shelving filter frequency
HSH G –12.0 to +12.0 dB High shelving filter gain
*1.
Description
Description