Output Channel Operations; Signal Flow For Output Channels - Yamaha 007POTO-G0 Owner's Manual

Output channel operations

This chapter explains operations for output channels (MIX channels, MATRIX
channels, STEREO channels, MONO channels).
The output channel section takes the signals sent from the input channels to the various buses,
processes them with EQ and dynamics, and sends them to output ports or other buses. The fol-
lowing types of output channel are provided.
■ MIX channels 1–16
These channels process the signals sent from input channels to MIX buses, and output them to the corresponding
output port, MATRIX bus, STEREO bus, or MONO (C) bus. When the LS9 is in the initial state, these are assigned
to the OMNI OUT jacks or the output channels of the slot(s).
M
O
N
ST MATRIX CUE
MIX
O
1 2 ... ...
15 16 L R (C) 1 2 7 8 L R
MIX 1-16
To RACKIN PATCH
To OUTPUT PATCH
MATRIX1,3...7
MATRIX2,4...8
ST L
MONO(C)
ST R
Chapter 6
Signal flow for output channels
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
INSERT POINT
MIX
PRE FADER INSERT OUT
INSERT OUT 1-16
PRE EQ INSERT OUT
MIX
INSERT IN 1-16
PRE EQ EQ OUT
METER
INSERT
4BAND
ATT
EQ
PRE EQ POST EQ
PRE EQ
INSERT OUT
CUE ON
LEVEL ON
LEVEL ON
LEVEL ON
PAN
DYNA OUT PRE FADER
METER METER METER
GR METER
LEVEL
ON
COMP
INSERT
COMPAND
EXPAND
PRE FADER
PRE FADER
INSERT OUT
Keyin
Self PRE EQ/Self POST EQ/MIX13-16 OUT/
MIX(1-8,9-16) POST EQ
(PRE FADER)PFL / (POST ON)AFL
To MATRIX
PRE FADER / POST ON
VARI
To MATRIX
PRE FADER / POST ON
VARI
STEREO
PAN MODE TO ST TO MONO
TO LCR
POST ON
METER
(13-16)To KEYIN
To RACKIN PATCH
MIX OUT1-16
To OUTPUT PATCH
To MONITOR SELECT
To RECORDER IN PATCH
POST ON
PAN
LR MONO
LCR
POST ON
CSR
LS9-16/32 Owner's Manual
6
67