Yamaha 007POTO-G0 Owner's Manual page 258

Functions that can be assigned to user-defined keys
Function PARAMETER 1
PAGE BOOKMARK
PAGE CHANGE
CLOSE POPUP
CH SELECT INC, DEC
SET [+48V]
SET [Ø]
SET [PRE SEND]
SET [TO STEREO]
SET BY SEL
SET [TO MONO]
SET [TO LCR]
SET [INSERT ON]
SET [DIRECT OUT]
SET DEFAULT
—
VALUE
SET NOMINAL
—
LEVEL
MIX1–16, MATRIX1–
SENDS ON FADER
8
GEQ FADER ASSIGN
TRANSPORT
RECORDER
DIRECT PLAY
HELP —
258
LS9-16/32 Owner's Manual
PARAMETER 2 LED
When storing a page:
Flash
When showing a
memorized page:
Blink
—
When not showing a
memorized page: Lit
Not memorized:
Dark
— Flash
— Flash
—
—
—
—
While pressing: Lit
—
—
—
—
— While pressing: Lit
— While pressing: Lit
Blinks in SENDS ON
—
FADER mode
— ON: lit, OFF: dark
Same as the indica-
PLAY/PAUSE, STOP, FF/
tion for the corre-
Next, REW/Previous,
sponding LCD
REC
button
AUTOREC While pressing: Lit
Song title or file name
While pressing: Lit
of audio files
— ON: lit, OFF: dark
Explanation
Memorize the currently selected screen (hold down the
key for two seconds or longer), or display the last-memo-
rized screen (press and release the key within two sec-
onds). Popup windows can also be memorized. In the case
of a rack, the number of that rack is also memorized.
Close the displayed popup window
Increment/Decrement the channel selection
Hold down this key and press SEL to switch it on/off. Dur-
ing this time, the [SEL] LED will be lit if on or dark if off.
Hold down this key and press the SELECTED CH encoder
to return to the default value. You can also return to the
default value by moving the cursor to the knob or fader in
the LCD screen, then holding down this key and pressing
the [ENTER] key.
While holding down this key, press a [SEL] key to set the
fader of that channel to nominal level. You can also push a
SELECTED SEND encoder to set the send level to nominal
level. You can also return to nominal level by moving the
cursor to the knob or fader in the LCD screen, then hold-
ing down this key and pressing the [ENTER] key.
Recall the Sends On Fader function to the selected MIX or
MATRIX
Turn the GEQ Fader Assign function on/off.
Recorder transport functions
Shortcut function for STOP → REC → PLAY.
Recording will be initiated in a single action. If this is exe-
cuted during recording, the file being recorded will first be
closed, and then recording will continue with a new file.
Start playback of a specified audio file from the begining
only once.
The audio file to be played must be saved in the SONGS
folder within the YPE folder. Please note that you won't be
able to specify a file that is in the root directory or another
folder. When you execute playback, the path in the TITLE
LIST screen will change to \YPE\SONGS\.
Switch the Help function on/off