Setting options on the user level
5.4 Viewing the outdoor temperature
18
EB 5432-1 EN
In the operating mode"Fixed set point control", the flow
temperature set point for reduced operation (time of non-
use) appears in the display.
The default value is 50.0 °C.
If you want to change the currently displayed value:
Press the control knob. The symbols at the bottom of the dis-
play start to blink.
Turn the control knob to set the required value and press
the knob to acknowledge the set value.
If you turn the control knob one position further, you can
view the current outdoor temperature (see the next chapter).
When an outdoor temperature sensor has been connected,
the outdoor temperature is displayed on the user level after
the reference value for room temperature or flow tempera-
ture set points.