Inconsistent Parameters; Initialisation; Paging Database Empty; Queue Full - Multitone ACCESS 3000 COMPACT Supervisor Manual

5.4

Inconsistent Parameters

This message can be shown for two seconds, during configuration, or when the
unit is powered up. It indicates one or more conflicts exist in the
parameter/options; some aspects of the configuration are incompatible with
others. This problem is most likely associated with the Special Dial Sequence,
when an option is enabled on Dial Digit, which is disabled within the system.
No action is required, after 2 seconds the system will continue.
5.5

Initialisation

This message is displayed during initialisation when the system is ready and
available for use the display will change. Pressing the key at this time has no
effect (except for Esc, which will, if held down, cause the system to commence in
Power up Configuration).
5.6

Paging Database Empty

Press Enter and create new paging users.
5.7

Queue Full

No more paging calls can be accepted - the appropriate internal queue is full:
Press Esc to cancel the call and Ctrl 1 to return to the main menu.
9261-7849 Issue 1
Inconsistent Parameters
******* Multitone Access 3000 Compact *******
-- Please wait --
No user to page
to create users
User 123 1234567890
-- Please wait --
www.multitone.com
Access 3000 Compact Supervisor's Guide
Page 61