Sending A Speech Call Initiated From A Dlc - Multitone ACCESS 3000 COMPACT Supervisor Manual

3.11

Sending a Speech Call Initiated From a DLC

1. If a paging call has been initiated by a DLC, which involves a one-way or two-
way speech paging call between the operator console and the paging user.
The screen prompt will change from the quiescent display, such as:
To:
2. Then at the screen prompt:
Press down the
capable of two-way speech, release the
3. Press the Delete key to end the call.
Note: Operators must be aware of what speech message is required, e.g. the
DLC may be activated by an intruder alarm and the operator must speak the
message appropriate to the event.
9261-7849 Issue 1
User
Enter User number
-- Please wait --
D034 U123 Alarm 999
- Speak Del - Finish
key to speak your message, if the receiver you are paging is
www.multitone.com
Access 3000 Compact Supervisor's Guide
to listen.
Page 26