Changing System Passwords - Multitone ACCESS 3000 COMPACT Supervisor Manual

4.21

Changing System Passwords

Determine your Supervisor and Operator passwords and follow the process
outlined below:
1. Press: Ctrl 1
2. Select: Administration [4]
3. Select: Password [7]
4. You will now be prompted to enter the Supervisor Password. If a password
exists, press Delete to remove all the numbers. Type-in the new password,
e.g. 1234 and press Enter.
5. You will now be prompted to enter the Operator Password. If a password
exists, press Delete to remove all the numbers. Type in a new number, e.g.
5678 and press Enter.
6. You will now be prompted with the message: Changes saved, press Enter,
this will take you to the administration menu.
7. Press Ctrl 1 to return to the main menu.
9261-7849 Issue 1
Access 3000 Compact Supervisor's Guide
www.multitone.com
Page 56