Paging A Set - Multitone ACCESS 3000 COMPACT Supervisor Manual

3.9

Paging a Set

A call to a Set is sent in the same way as paging a user. Please note that you
may not send a speech call to a Set.
1. Press Ctrl 1 then press 1 to select Page User
2. Type in the Set Identification number, e.g. 300 and press Enter
3. You will now be prompted with one of several screens depending on the least
featured pager type within the Set you are calling, see below:
a. If you are paging a Set that includes a Tone Only pager as the least
featured pager type you will be prompted with the screen:
Press A or B to page
b. If you are paging a Set that includes a Numeric pager as the least
featured pager type you will be prompted with the screen:
Type in your message:
Press A or B to page.
9261-7849 Issue 1
1- Page User
2- Page Team
User 300
Enter user number
User 350
Press A or B to Page
User 350 _
Message
350 1234
Press A or B to Page
www.multitone.com
Access 3000 Compact Supervisor's Guide
12:00
Page 23