Multitone ACCESS 3000 COMPACT Supervisor Manual page 34

Status Search [4]
1. You will now be prompted with Status 0, 0 equals status out. If you want to
search by status out, press the ↓ key to search through all the user numbers
that are OUT.
2. If you want to search by user numbers whose Status is IN. Enter 1 and press
the ↓ key to search through all the user numbers that are IN.
3. If you wish to examine or modify of any record press Enter, or press Ctrl 1 to
return to the main menu.
User in Team Search [5]
1. Enter a user number, e.g. 123 and press the ↓ key to search through the team
numbers associated with this user.
2. If the user number 123 is in a team, e.g. team 01, you will now get the
message: User 123 Team 01, you may either:
a. Press the ↓ key to search through other teams with including the user
number 123, or
b. Press Enter to edit the team, refer to Section 4.9 - Editing a Team
Record.
3. Exit by pressing Ctrl 1 to return to the main menu.
User in DLC Search [6]
1. Enter a user number, e.g. 123 and press the ↓ key to search through the DLC
numbers associated with the user.
2. If the user number is in a DLC record, e.g. DLC 01, you will now receive the
message: User 123 DLC 01. Press Enter to modify the DLC record and refer
to section 4.11 Creating and Editing a DLC Record.
3. To finish at any point press Ctrl 1 to return to the main menu.
9261-7849 Issue 1
Access 3000 Compact Supervisor's Guide
www.multitone.com
Page 34