Emerson Micro Motion 5700 Installation Manual page 38

Wiring the channels
March 2020
Procedure
1. Attach both M12-terminated Ethernet cables to the Ethernet I/O connectors on the
2. Attach the other cable end using the pinouts described in
38
5700 transmitter. See Figure
Figure 4-13: M12 cables to the Ethernet I/O
Note
Depending on what type of M12 Ethernet option you have, your transmitter may
have only the two Ethernet I/O connectors.
Table 4-2: M12 Ethernet I/O pinouts
Pin Wire color
identificati
on
Pin 1 Orange/White
Pin 2 Green/White
Pin 3 Orange
Pin 4 Green
4-13.
Outputs on RJ45
Pin 1
Pin 3
Pin 2
Pin 6
Micro Motion 5700 Ethernet Transmitters
Installation Manual
MMI-20029768
Table 4-2.
Signal name
TDP1/RDP2
RDP1/TDP2
TDN1/RDN2
RDN1/RDN2