Emerson Micro Motion 5700 Installation Manual page 21

Ethernet transmitters

Hide thumbs Also See for Micro Motion 5700:

Table of Contents

Installation Manual

MMI-20029768

4. Replace the transmitter-to-sensor wiring compartment cover and tighten the

Installation Manual

Important

Terminate the 4-wire cable drain wires only at the sensor/core processor end of the

cable. See the sensor installation manual for more detail. Do not connect the 4-wire

cable drain wires to the ground screw located inside the 5700 junction box.

•

See

Figure 3-10

for 4-wire terminal connections.

•

See

Figure 3-11

for 9-wire terminal connections.

Figure 3-10: 4-wire transmitter-to-sensor wiring connections

Figure 3-11: 9-wire transmitter-to-sensor wiring connections

Note

Connect the 4 drain wires in the 9-wire cable to the ground screw located inside the

junction box.

screws to 14 in lbf (1.58 N m) to 15 in lbf (1.69 N m).

Mounting and sensor wiring

March 2020

Table of Contents