Emerson Micro Motion 5700 Installation Manual page 37

Installation Manual
MMI-20029768
4.3.1 Daisy chain and ring topologies
Procedure
1. Feed two RJ45 cables through the conduits on the 5700 transmitter.
2. Connect the external switch or previous transmitter to Channel A or Channel B.
3. Connect the next transmitter in the network to the unused channel.
4. Anchor the cables to the module backplate using cable ties.
4.3.2 Wire the Ethernet I/O using M12-terminated cables
(optional)
Prerequisites
Obtain two D-coded M12-terminated Ethernet cables.
Installation Manual
Example
Since two cables will not fit into one conduit, you will need to use separate conduits
for each cable.
Functionality is identical for both Channel A and Channel B as the 5700 transmitter
contains an internal Ethernet switch.
Example
Wiring the channels
March 2020
37