Installing The Fork Protector; Removing The Fork Legs - Husqvarna FS 450 2019 Owner's Manual

11.6

Installing the fork protector

11.7

Removing the fork legs

SERVICE WORK ON THE CHASSIS 11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
F00408-11 tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Allow the brake caliper and brake line to hang loosely to the
side.
F00429-10
–
Loosen screws
–
Loosen screws
V01431-10
https://www.motorcycle-manual.com/
1
.
M6 10 Nm (7.4 lbf ft)
3
.
M6 10 Nm (7.4 lbf ft)
p. 43)
( p. 86)
1
and take off the clamp.
2
. Take out the left fork leg.
3
. Take out the right fork leg.
45