Installing The Lower Triple Clamp - Husqvarna FS 450 2019 Owner's Manual

11.10

Installing the lower triple clamp

3 0 0 3
2 0 0 2
1 0 0 1
SERVICE WORK ON THE CHASSIS 11
Main work
–
Remove indicator lamp holder.
–
Open cable holder
ness.
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and place
to one side.
V01432-10
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove O-ring
–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01433-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
800221-10
https://www.motorcycle-manual.com/
1
on the left and detach the wiring har-
2
.
3
.
4
.
5
.
p. 131)
1
2 3
and O-ring .
is correctly posi-
47