Husqvarna FS 450 2019 Owner's Manual page 44

10 TUNING THE CHASSIS
42
–
–
–
–
Finishing work
–
https://www.motorcycle-manual.com/
Info
Make sure the cables and wiring are positioned cor-
rectly.
Position handlebar clamps.
1
Mount screws but do not tighten yet.
First bolt the handlebar clamps with screws
longer, higher side of the handlebar supports so that both
parts touch.
Guideline
Screw, handlebar M8
clamp
1
Tighten screws evenly.
Guideline
Screw, handlebar M8
clamp
Mount the handlebar cushion.
1
onto the
20 Nm (14.8 lbf ft)
20 Nm (14.8 lbf ft)