Installing The 12 V Battery; Charging The 12 V Battery - Husqvarna FS 450 2019 Owner's Manual

14 ELECTRICAL SYSTEM
14.2
14.3
94

Installing the 12 V battery

H02650-10

Charging the 12 V battery

Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
https://www.motorcycle-manual.com/
Main work
–
Position the 12 V battery in the battery compartment with
the terminals facing forward, and secure with holding
1
bracket .
12 V battery (HJTZ5S-FP-C) (
–
Mount and tighten screw
Guideline
Remaining nuts,
chassis
Info
A
Contact disks
and cable sockets
tery terminal.
–
5
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Slide positive terminal cover
–
7
Connect negative cable
Guideline
Screw, battery termi-
nal
–
Position the voltage regulator.
Finishing work
–
Mount the seat. ( p. 56)
–
Install the air filter box cover. (
1 m (3 ft)
9 V
p. 125)
2
.
M6 10 Nm (7.4 lbf ft)
must be mounted under screws
4
with the claws toward the bat-
to the 12 V battery.
M5 2.5 Nm (1.84 lbf ft)
6
over the positive terminal.
to the 12 V battery.
M5 2.5 Nm (1.84 lbf ft)
p. 57)
3