Husqvarna FS 450 2019 Owner's Manual page 112

17 SERVICE WORK ON THE ENGINE
110
Preparatory work
–
Main work
–
–
K01068-10
–
K01069-10
–
–
–
K01070-10
–
K01069-11
–
–
–
K01071-10
https://www.motorcycle-manual.com/
Park the motorcycle on a level surface.
Place an appropriate container under the engine.
1
Remove oil drain plug with the magnet and seal ring.
2
Remove screw plug with the short oil screen and the O-
rings.
Info
Do not remove screw
3
Remove screw plug with the long oil screen
O-rings.
Completely drain the engine oil.
Thoroughly clean the parts and sealing surfaces.
Mount and tighten screw plug
and the O-rings.
Guideline
Screw plug, oil M20x1.5
screen
4
Position long oil screen with the O-rings on a pin wrench.
Position the pin wrench through the drill hole of the screw
plug in the opposite section of the engine case.
Push the oil screen all the way into the engine case.
A
.
4
and the
2
with the short oil screen
15 Nm (11.1 lbf ft)