Recommended Work - Husqvarna FS 450 2019 Owner's Manual

9 SERVICE SCHEDULE
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for
cracking, tightness, and correct routing.
Check the antifreeze and coolant level. (
Check the cables for damage and for routing without kinks.
Check that the throttle cables are undamaged, routed without sharp bends, and
set correctly.
Clean the air filter and air filter box.
Change the glass fiber yarn filling of the main silencer.
Service the fork.
Perform the shock absorber service.
Check the screws and nuts for tightness.
Change the fuel screen.
Check the fuel pressure.
Check idle speed.
Final check: Check the vehicle for operating safety and take a test ride.
Read out the fault memory after the test ride using the Husqvarna Motorcycles
diagnostics tool.
Make the service entry in Husqvarna Motorcycles Dealer.net and in the Service
& Manufacturer Warranty Booklet.
○
One-time interval
●
Periodic interval
9.3
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Lubricate the steering head bearing.
Service the fork.
Perform the shock absorber service.
Change the fuel filter.
Perform minor engine service, engine has been installed. (Change the spark plug and
spark plug connector. Change the piston, check and measure the cylinder; check the
cylinder head. Check the camshaft, rocker arm and rocker arm shafts. Check timing
assembly.)
30
(
( p. 108)

Recommended work

(
https://www.motorcycle-manual.com/
Every 10 operating hours
Once after 1 operating hour
p. 98)
p. 58)
( p. 60)
Once after 20 operating hours
Once after 10 operating hours
p. 73)
( p. 51)
after every race
Every 40 operating hours
Every 30 operating hours
Every 20 operating hours
○ ● ●
○ ● ●
● ●
○ ● ●
● ●
●
○ ● ●
○ ● ●
● ●
○ ● ●
○ ● ●
○ ● ●
○ ● ●
Every 100 operating hours
Every 50 operating hours
○
○
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
●
●
●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
Annually
●
●
●
●
●
● ●