11 SERVICE WORK ON THE CHASSIS
11.39
11.40
11.41
70
F00398-01
Checking the frame
K01114-01
Checking the link fork
401520-01
Checking throttle cable routing
https://www.motorcycle-manual.com/
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for cracks and deformation.
»
If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
Info
Always replace a frame that has been
damaged due to a mechanical impact. Repair
of the frame is not authorized by Husqvarna
Motorcycles.
–
Check the link fork for damage, cracking, and deformation.
»
If the link fork exhibits damage, cracking, or deformation:
–
Change the link fork.
Info
Always replace a damaged link fork. Repair of
the link fork is not authorized by Husqvarna
Motorcycles.
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
p. 56)
–
Remove the right side cover. (
–
Remove the fuel tank.
M6
10 Nm (7.4 lbf ft)
p. 43)
p. 57)
p. 61)
(
p. 62)