Installation - Oricom CARE80S User Manual

Installation

Installation
Recommandations
• Do not expose the phone to direct sunlight or excessive temperature.
• Operating temperature between + 5 °C and + 40 °C.
• Your phone must be installed at least 1 meter away from radio equipment such
as television, cell phone, etc.
NOTE: Phone should not be mounted at a height greater than 2 m.
Telephone installation
• Your phone should be placed on a flat surface for more stability. Plug the coiled
cord into the handset (A) and into the socket on the left side of the phone (B).
• Plug the telephone cord into the socket at the back of the set and into the wall
outlet (C) or into the telephone port of the internet box. For desktop position,
raise the 2 feet under the base (D).
(C)
Wall mounting
• Fold the 2 feet under the base (D).
• Flip the small plastic piece on the base (14).
• Drill two 6mm holes spaced 100mm apart. Insert 2 wall plugs and screw in the
wood screws (3.5 mm in diameter and 30 mm long).
• Mount the base to the 2 screws by pulling it downwards.
NOTE: Phone should not be mounted at a height greater than 2 m.
Insert a photo (or the SOS label) on one of the
6 memory keys
• Remove the transparent cover attached to the photo memory button.
• Cut out the chosen photo using the provided photo cutting guide.
• Put the photo on the key and replace the transparent cover on the photo.
(A)
(B)
6
(D)