Express Warranty (Australia) - Oricom CARE80S User Manual

Setting flash time
By default, the programmed flash time is 100ms. If change is needed:
+ /
+ /
+ /
Setting tone or pulse mode
By default, the TONE mode is programmed. To modify it:
- + /
- + /

Express Warranty (Australia)

This Express Warranty is provided by Oricom International Pty Ltd ABN
46 086116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756,
herein after referred to as "Oricom". Oricom products come with guarantees
that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Oricom warrants that the product is free from defects in materials
or workmanship during the Express Warranty Period. This Express
W a r r a n t y d o e s n o t e x t e n d t o a n y p r o d u c t f r o m w h i c h t h e s e r i a l
number has been removed or was purchased outside of Australia.
Nothing in this Express Warranty excludes, restricts or modifies any
condition, warranty, guarantee, implied term, right or remedy pursuant
to the Australian Consumer Law and which may not be so excluded,
restricted or modified. For such conditions, terms, guarantees and
warranties that cannot be excluded, restricted or modified, Oricom limits
the remedies available to extent permitted in the relevant legislation.
/ / /
/ / /
/ / /
/ / /
/ / /
= 100ms
/
= 300ms
/
= 600ms
/
= pulse
/
= tone
/
9
Programming