Programming - Oricom CARE80S User Manual

General Use
Set handset volume and audio-boost
During handset conversation, 2 modes of amplification are available:
• Standard mode
Press or to increase or decrease (4 levels).
• Audio boost mode (extra strong up to + 30dB)
During handset conversation, press the
amplification.
A slider on the back of the phone (AMPLIFY) is used to always activate the
audio boost function. By default, the position is "OFF" If it is in the "ON" position,
the audio boost will be automatically activated at each call.
Handset receiver equalizer adjustment
Slide the switch to adjust the handset receiver sound frequency pitch (bass or
treble) .

Programming

Program memory keys (SOS, photos and M1, M2)
1) Pick up the handset.
2) Press .
3) Dial the phone number to be stored, eg 0612345678.
4) Press the memory key dedicated to this number (SOS, Photos, M1 orM2).
The SOS number is the one you want to reach in case of emergency.
5) Hang up the handset. It is advisable to make a test to verify the registered
number is correct.
6) To change the number, repeat the procedure from 1.
key. Press this button again to stop
8