If...
If connected directly to the Ethernet service port of the device, click Front Panel Ethernet.
6
7
Click Connect to make the connection.
Step result: If this is an SNMPv3-capable device, a Passphrase Prompt screen opens. Skip to step 9.
Figure 4-4 SNMPv3 Security Level Option Prompt
For Windows XP computers: If after clicking Connect, a "comm.Error" is encountered when
connecting to the front panel Ethernet port on a base radio, follow the procedure in step 8 to repair
the local area connection (LAN) or high-speed Internet connection.
6871022P86-A - November 2012
4.4.4 Connecting Through an Ethernet Port Link
Then...
For a site controller or RDM, select Set IP
Address/Box Number.
3. Read the IP address from the Device IP
Address field.
4. Re-establish an Ethernet connection and repeat
steps 1 through 4.
5. Enter the IP address for the device in the
Device IP Address field.
6. Continue with step 6.
4-13