Figure 3-2 Lengths And Angles For Lifting Using The Eyenuts - Motorola GTR 8000 Manual

GTR 8000 Base Radio
Do not use the eyenuts if damage is apparent. Contact Motorola for replacements.
Use all four eyenuts when lifting the equipment rack. The minimum distance from each eyenut to the lifting point
must be 1.2 meters (47.2 in). Using a shorter length than that specified could cause the eyenuts to fail. This figure
shows the minimum lengths and proper lifting angles using the eyenuts.

Figure 3-2 Lengths and Angles for Lifting Using the Eyenuts

If eyenuts are removed or become loose, install them properly before lifting the equipment rack. Tighten the eyenuts
and bolt assembly by hand. Correct eyenut tightness and alignment are crucial to ensure the eyenut assembly
performs to its intended lifting capacity. The eyenuts must be aligned to point towards the center lifting point of the
cabinet and tightened to between 90 to 120 in-lbs torque.
This figure shows the proper alignment of the eyenuts.
3-6 6871022P86-A - November 2012