Replacing A Power Supply; How To Replace A Power Supply; Figure 9-4 Power Supply - Motorola GTR 8000 Manual

9.4 Replacing a Power Supply

Figure 9-4 Power Supply

The power supply output is directly mapped to a PA/transceiver combination. Removal of a power supply
will result in a loss of the associated transmit channel until the replacement power supply is inserted
and turned ON.
It is recommended that you disable the channel before replacing the module, so that the system does not
attribute the loss of channel to a failure. You can disable a channel using Unified Event Manager, or the
Configuration/Service Software (CSS).
The Power Supply module contains dangerous voltages which can cause electrical shock to people or
damage to equipment.

9.4.1 How To Replace a Power Supply

Procedure Steps
6871022P86-A - November 2012
9.4 Replacing a Power Supply
9-13