Table of Contents
Advertisement
GTR 8000 Base Radio
Process Steps
Configure Domain Name Service (DNS) on the device. See Chapter 7, "Configuring DNS on RF Site and VPM
1
Devices Using VoyenceControl" in the Authentication Services manual.
2
Configure Authentication Sources for the device. See Chapter 7, "Configuring Authentication Sources for RF
Site and VPM Devices Using VoyenceControl in the Authentication Services manual.
3
Configure RADIUS parameters for the device. See Chapter 7, "Configuring Radius Parameters for RF Site and
VPM Devices Using VoyenceControl" in the Authentication Services manual.
4
Set the Local Cache Size for Centralized Authentication for the device. See Chapter 7, "Setting the Local Cache
Size for Central Authentication on RF Site and VPM Devices Using VoyenceControl" in the Authentication
Services manual.
5
Enable/Disable Centralized Authentication for the device. See Chapter 7, "Enabling/Disabling Centralized
Authentication on RF Site and VPM Devices Using VoyenceControl" in the Authentication Services manual.
6
Enable/Disable Centralized Event Logging for the device. See Chapter 6, "Enabling/Disabling Centralized
Event Logging on RF Site Devices and VPM's Using VoyenceControl" in the Centralized Event Logging manual.
4-34
6871022P86-A - November 2012
Advertisement
Table of Contents
Troubleshooting
