Figure 5-28 Hpd Service Monitor - Rf Control Settings Window (Aeroflex 3900 Series Service Monitor) - Motorola GTR 8000 Manual

2 Using the soft keys on the right side of the screen, configure the service monitor GEN port to generate inbound
signaling to the base radio, as follows:
a. Click the ON soft key under RF Gen.
b. Click the GEN soft key under RF Out.
c. Click the ENABLE soft key under Transmit.
Maximize the RF Control Settings window, by clicking the upper left corner of the window.
3
Step result: All of the RF Control Settings fields display.
Figure 5-28 HPD Service Monitor - RF Control Settings Window (Aeroflex 3900 Series
Service Monitor)
6871022P86-A - November 2012
5.11.4 Measuring HPD BR Rx Sensitivity and Rx BER
5-53