Figure 9-11 Emi Spring Panel Guide Rail Alignment - Motorola GTR 8000 Manual

19 Slide the EMI spring panel back into the cabinet, making sure that the offset tabs on the panel are to the right
(inside) of the power supply guide rail, making sure that the panel does not catch on the fan cable.

Figure 9-11 EMI Spring Panel Guide Rail Alignment

20 Reinstall the screw into the EMI spring panel tab.
21 Slide the transceiver and power amplifier modules into the new backplane. A slight push may be needed
to engage the modules.
22 Reconnect all cables to the front ports on the transceiver, if applicable.
23 Secure the transceiver and power amplifier modules to the chassis with the two captive screws on the front
of each module.
6871022P86-A - November 2012
9.7.1 How To Replace a GTR 8000 Base Radio Backplane
9-25