Adding Or Modifying An Snmpv3 User Using Css - Motorola GTR 8000 Manual

GTR 8000 Base Radio
8 To change the Authentication Passphrase for the selected SNMPv3 user (if applicable to the selected security
level), type the password into the Old Passphrase Field in the Authentication Passphrase form of the Configure
SNMPv3 Users dialog box.
If you do not know the passphrase, click the I do not remember old passphrase check box.
9 Type the new passphrase into the New Passphrase field.
Passphrase must be between 8 and 64 characters in length and passphrase must consist of upper or
lowercase alphanumeric characters (excluding the @ # $ ^ or _ characters).
10 Type the same new passphrase into the Confirm New Passphrase field.
11 To change the encryption passphrase for the selected SNMPv3 user (if applicable to the selected security level),
type the old passphrase into the Old Passphrase Field in the Encryption Passphrase form of the Configure
SNMPv3 Users dialog box.
If you do not know the passphrase, click the I do not remember old passphrase check box.
12 Type the new passphrase into the New Passphrase field, then type the same new passphrase into the Confirm
New Passphrase field.
13 To change the Authoritative Engine Identifier (applicable to MotoInformA and MotorInformB users only),
select the desired current engine ID from the Current Engine ID List in the Authoritative Engine ID Section
of the Configure SNMPv3 Users dialog box.
14 Type the new engine ID into the New Engine ID field.
The new engine ID must be between 1 and 27 characters and comply with the Engine ID Domain Name
Syntax.
Step result: The authoritative engine ID is assigned.
15 To create, update, or delete SNMPv3 users, continue on with
Using CSS, page

4.4.5.3.1 Adding or Modifying an SNMPv3 User Using CSS

This procedure describes how to create, update, or delete an SNMPv3 user from the Configure SNMPv3 Users
Screen dialog box.
4-18
4-18.
4.4.5.3.1 Adding or Modifying an SNMPv3 User
6871022P86-A - November 2012