Setting The Ntp Server Settings; Figure 4-6 Remote Access Configuration Tab - Motorola GTR 8000 Manual

GTR 8000 Base Radio
2 Select Security → Device Security Configuration → Remote Access/Login Banner (Ethernet) from the
menu.
Step result: The Remote Access/Login Banner screen appears displaying the Remote Access Configuration
tab.

Figure 4-6 Remote Access Configuration Tab

3 In the Software Download Transfer Mode (Requested) field, choose either Ftp (clear) or Sftp (secure).
Click OK.
Secure Shell Service and Secure FTP services are automatically set to Enabled and grayed out when
you choose Sftp.

4.4.5.7 Setting the NTP Server Settings

Network Time Protocol (NTP) provides a clock synchronization mechanism for various Network devices and
computers. To allow the NTP server to provide date and time synchronization for a particular device, the NTP
server's IP address must be entered on the Manager / NTP Definition Screen.
For security purposes, the base radio can restrict NTP messages to only those from the site controller. This is done
by configuring two site controller IP addresses into the NTP Server IP Address fields on the base radio.
See the NTP Server Settings in the CSS On-line Help for defining, editing, and removing these settings.
4-24 6871022P86-A - November 2012