Table of Contents
Advertisement
Figure 9-3 Fan Assembly
9.3.1 How To Replace the Fan Assembly
Procedure Steps
Wear an electrostatic discharge (ESD) wrist strap and connect its cable to a verified good ground. This strap
1
must be worn throughout this procedure to prevent ESD damage to any components.
2
Using a T20 bit, loosen the three captive screws on the front of the fan assembly, so they disengage from
the chassis.
3
Using the handle on one end and the edge on the other side, gently pull the fan assembly straight out to
disengage the connector.
6871022P86-A - November 2012
9.3.1 How To Replace the Fan Assembly
9-11
Advertisement
Table of Contents
Troubleshooting
