Rc6Gs V2 Functions; Display On Lcd Screen - RadioLink RC6GS V2 Instruction Manual

II. RC6GS V2 Functions

2.1 Display on LCD Screen

Model Name
Subsidiary ID
Transmitter
Name
When you power on the transmitter, LCD screen shows Model Name, Transmitter Name, Transmitter Voltage,
Steering Trim, Throttle Trim, Model Voltage, Subsidiary Model ID, Returned Signal.
Note The Subsidiary ID won't display until the function is activated in the menu ID SEED.
The telemetry function of model battery voltage can only be realized with R7FG/R8F.
Model Name
The system can store the data for 10 models, model name will show on the LCD when you power on the
transmitter. Please make sure the model name is the right one that you want.
If the model name you chose is not corresponding with your model, the settings should be wrong.
Transmitter Voltage
In addition to the model, LCD can show the voltage of battery. When the voltage is lower than 4.6V, it would
6
RadioLink Electronic Ltd
www.radiolink.com
Transmitter Voltage
Model Voltage
(Telemetry of 2S-6S
battery)
Steering Trim
Throttle Trim