UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
3.2.6 Connecting Communications Cables
Prerequisites
Figure 3-37 Communications cable routing
3.2.6.1 Connecting a Remote EPO Switch
Connect the EPO switch to the dry contact card on the UPS.
Issue 01 (2020-04-13)
The following figure uses cable routing from the top as an example.
The number and colors of communications cables are for reference only.
Huawei does not provide an EPO switch and cable. Prepare them before installation. The
22 AWG cable is recommended. AWG is short for American wire gauge.
To prevent problems, equip the EPO switch with a protective cover, and enclose the cable
with a protective tube.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
87