UPS5000-E-(60 kVA-125 kVA)
User Manual (Integrated UPS 3.0)
Figure 2-35 Pulling out the handle
If the handle is not pulled out, the automatic mode will be disabled.
Step 4 Flip the Motor/Manual selection lever to the Motor
Figure 2-36 Flipping the Motor/Manual selection lever
Step 5 Check whether the Power LED indicator is on, as shown by (1) in Figure 2-37.
Step 6 Check whether the Auto LED indicator is on.
Issue 01 (2020-04-13)
If the Auto LED indicator is off, the controller is working in the button mode, as shown
by (3) in Figure 2-37.
If the Auto LED indicator is on, press the Auto button once. Then the Auto LED
indicator turns off, and the controller enters the button mode, as shown by (2) in Figure
2-37.
Copyright © Huawei Technologies Co., Ltd.
position.
2 Overview
48