Advertisement
CHAPTER 3 MECHANICAL SYSTEMS
1.2.5 Removing the Processing Tray Assembly
1) Remove the processing tray upper
cover. (See 1.1.5.)
2) Remove the side guide. (See 1.1.7.)
3) Remove the two screws [1], and discon-
nect the five connectors [2].
4) Pull the processing stopper base [3] to
the front, and free the claw [5] at the
front and the claw [6] at the rear of the
processing stopper [4].
3-16
COPYRIGHT © 2001 CANON INC.
Chap03.p65
[2]
[6]
[4]
2000 2000 2000 2000
16
[1]
[2]
[1]
F03-102-20
F03-102-21
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:09 PM
[2]
[5]
[4]
[3]
Advertisement
