Advertisement
7) Remove the screw [9].
8) Disconnect the connector [10] to remove
the LED PCB [11].
2.2.4 Removing the Waste-Full PhotoSensor PCB
1) Remove the punch controller PCB. (See
2.2.1.)
2) Remove the two screws [1] to remove
the PCB film [2].
COPYRIGHT © 2001 CANON INC.
Chap03.p65
[2]
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
41
CHAPTER 3 MECHANICAL SYSTEMS
[9]
[11]
F03-202-06
[1]
F03-202-07
3/28/01, 12:09 PM
[10]
3-41
Advertisement
