Related Manuals for Sharp AR-F14N
Summary of Contents for Sharp AR-F14N
-
Page 1: Table Of Contents
MODEL AR-F14N SADDLE STITCH FINISHER OPERATION MANUAL Page • SADDLE STITCH FINISHER • PARTS OF THE SADDLE STITCH FINISHER • SPECIFICATIONS • FUNCTIONS OF THE SADDLE STITCH FINISHER • USING THE SADDLE STITCH FINISHER FUNCTIONS • USING THE SADDLE STITCH FINISHER TO MAKE COPIES •... -
Page 2: For Users In The Usa
For users in the USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the... -
Page 3: Saddle Stitch Finisher
SADDLE STITCH FINISHER The saddle stitch finisher features the offset function, which makes it easy to distinguish sets of output, and the saddle stitch (pamphlet) function, which automatically staples and folds output down the center. An optional punch unit can also be installed to punch holes in output. PARTS OF THE SADDLE STITCH FINISHER Stapler section Top cover... -
Page 4: Specifications
SPECIFICATIONS Name Saddle Stitch Finisher Number of trays Paper output Face down (when using the offset tray) Tray types Upper tray: Offset tray Lower tray: Saddle stitch tray Tray capacity* Upper tray: Without stapling 8-1/2" x 11" / A4 size or less: Approx. 1000 sheets* 8-1/2"... -
Page 5: Functions Of The Saddle Stitch Finisher
Supplies The following staple cartridge is required as a supply for the saddle stitch finisher: ● AR-SC2 Staple Cartridge (approx. 5000 staples x 3) FUNCTIONS OF THE SADDLE STITCH FINISHER ■ Sort function ■ Group function Collates printed pages Groups printed pages by page Originals Output Originals... - Page 6 ■ Punch function (only when a punch unit is installed) When an optional punch unit is installed on the [Example] saddle stitch finisher, holes can be punched in the Original 1 Punch hole positions output. Punched output is delivered to the offset tray.
-
Page 7: Using The Saddle Stitch Finisher Functions
USING THE SADDLE STITCH FINISHER FUNCTIONS ■ Using the saddle stitch finisher functions in copy mode Touch the [OUTPUT] key in the main screen of copy mode to display the screen for selecting saddle stitch finisher functions. Selections include the sort function, staple sort function, saddle stitch function, group function, and output tray. -
Page 8: Using The Saddle Stitch Finisher To Make Copies
• When loading letterhead paper in the tray, orient the paper so that Note SHARP the letterhead is away from you or to the left, as shown at right. • When the staple sort or punch function is used, the automatic original... -
Page 9: Using The Rspf
The procedure for using the staple sort function is explained below. Place the original (p.6). Using the RSPF Copying begins after all pages are scanned. Using the document glass Touch the [OUTPUT] key. Place the next page on the document glass and press the [START] key ( ). -
Page 10: Replacing The Staple Cartridge
REPLACING THE STAPLE CARTRIDGE AND REMOVING STAPLE JAMS A message will appear in the display when the staple cartridge needs replacement or a staple jam occurs. Follow the procedures below to replace the cartridge or remove the jam. ■ Replacing the staple cartridge Open the front cover. - Page 11 ■ Removing a staple jam Press the detach button and separate the Remove any misfed paper. saddle stitch finisher from the machine. Remove the paper gently without tearing it. The saddle stitch finisher and the Close the saddle stitch section cover. Caution machine are connected at the rear.
- Page 12 Raise the lever on the front edge of Push in the staple box. the staple box. Push the staple box all If the leading staple is the way in until you hear bent, be sure to cut it off. a "click". If a bent staple is used for stapling, a staple jam will result.
-
Page 13: Removing Paper Misfeeds
REMOVING PAPER MISFEEDS When a paper misfeed occurs during copying, a message and picture will appear in the display of the operation panel as shown below and copying will automatically stop. Follow the procedures below to remove the misfeed. A MISFEED HAS OCCURRED. INFORMATION When a misfeed occurs, you can touch the [INFORMATION] key to display brief instructions for removing the Note... -
Page 14: Misfeed In The Saddle Stitch Finisher
■ Misfeed in the saddle stitch finisher Press the detach button and separate Remove the misfed paper. the saddle stitch finisher from the machine. Remove the paper gently, taking care not to tear it. Close the top cover. The saddle stitch finisher and the Caution machine are connected at the rear. - Page 15 Open the front cover. Push the saddle stitch finisher back onto the machine. Rotate roller rotating knob D in the direction of the arrow. Roller rotating knob D Remove any misfed paper from the saddle stitch tray. Remove the paper gently, taking care not to tear it.
-
Page 16: Troubleshooting
TROUBLESHOOTING (RELATED TO SADDLE STITCH FINISHER) If you experience difficulty with the saddle stitch finisher, check the following troubleshooting guide before calling for service. Many problems can be resolved by the user. Problem Cause and solution Page The staple function is not set correctly for the desired Stapling position is not correct staple position. -
Page 17: Using The Key Operator Programs
USING THE KEY OPERATOR PROGRAMS When the saddle stitch finisher is installed on the multifunction machine, the key operator programs indicated below are added or changed. For information on "USING THE KEY OPERATOR PROGRAMS", see page 2 of the "Key operator's guide"... - Page 18 MEMO...
- Page 19 For Europe SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg...
- Page 20 AR-F14N PRINTED IN JAPAN Printed on 100% post-consumer recycled paper...