Advertisement
3.4.1 Stapler Movement Controller
The stapler unit is moved by the slide motor (M8). Its home position is detected by the
slide home position sensor (PI18). The stapler waits at the back irrespective of the staple
mode and paper size. After paper has been stacked on the processing tray, the stapler is
moved to the specified stapling position in response to the stapling command from the host
machine.
F02-304-03 shows the standby position of the stapler and the stapling position depending
on the staple mode.
a. Front 1-point stapling
The stapler waits at the back. The stapler moves to and returns from the stapling position
for each stapling operation.
Feed direction
COPYRIGHT © 2001 CANON INC.
Chap02.p65
CHAPTER 2 OUTLINE OF OPERATION
F02-304-03
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
31
Standby position
Stapler
Stopper
Stapling position
3/28/01, 12:07 PM
2-31
Advertisement
