Advertisement
CHAPTER 2 OUTLINE OF OPERATION
2.3.4 Stack Delivery Operation
Stack delivery takes place when 10 sheets of large-size paper or 30 sheets of small-size
paper (A5- and STMT-sizes: 10 sheets) have been stacked on the processing tray with them
offset in either direction.
The paddle motor rotates and the swing guide descends to hold the paper stack between
the upper and lower stack delivery rollers. The delivery motor rotates in the forward direc-
tion to rotate the delivery rollers, feeding the paper stack in the delivery direction. The deliv-
ery belt home position sensor is turned OFF. The delivery motor is driven a specified num-
ber of pulses, causing the swing guide to ascend. Next, the paper delivery motor is driven.
Next, the delivery motor is driven to deliver the paper stack with the nails of the delivery
belt that rotates in sync with the stack delivery rollers.
Job offset sequence
Inlet sensor (PI1)
Processing tray sensor
(PI6)
Feed motor (M1)
Delivery motor (M3)
Delivery belt home
position sensor (PI7)
Paddle motor (M2)
Paddle home position
sensor (PI2)
Swing guide home
position sensor (PI3)
Stapler safety switch
(MS3)
Alignment motor (front)
(M4)
Aligning plate home position
sensor (front) (PI4)
Alignment motor (rear)
(M5)
Aligning plate home position
sensor (rear) (PI5)
2-22
COPYRIGHT © 2001 CANON INC.
Chap02.p65
F02-203-05
Start signal
Host machine delivery signal
360msec
360msec
60msec
F02-203-06
2000 2000 2000 2000
22
Swing guide
360msec
360msec
30msec
220msec
CW rotation
CCW rotation
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:18 PM
Advertisement
