Advertisement
CHAPTER 3 MECHANICAL SYSTEMS
7) Turn the gear [16] to align the round
hole in the staple driver gear with the
round hole [17] at the back.
8) Insert a pin [18] with a diameter of ap-
proximately 2 mm (use of a 2 mm Allen
wrench is recommended) in the round
hole to secure the gear.
3-10
COPYRIGHT © 2001 CANON INC.
Chap03.p65
[18]
2000 2000 2000 2000
10
[17]
F03-102-07
F03-102-08
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:09 PM
[16]
Advertisement
