Advertisement
CHAPTER 5 TROUBLESHOOTING
5.3 Alarm
5.3.1 Finisher/Saddle Unit
Error
Condition
Stapler absent
The stapler is not
set.
Staple absent
The staple car-
tridge has run out
of staples.
Mixed sheets
Sheets of differ-
ent sizes are de-
posited in the
compartment.
Overstacking for
The number of
stapling
sheets in the com-
partment has ex-
ceeded the limit
imposed on sta-
pling.
Stack tray
The number of
overstacking
sheets deposited
on the delivery
tray has exceeded
the limit imposed
on the tray
(sheets, sets).
Saddle
Remove the stack
overstacking
from the bind
tray.More than 10
stacks are depos-
ited on the folded
stack tray.
5-32
COPYRIGHT © 2001 CANON INC.
Chap05.p65
Timing of detection
Monitoring at all
times
Monitoring at all
times
When a sheet of a
different size is
placed.
When an extra sheet
is placed.
When an extra sheet
is placed.
When an extra sheet
is placed.
T05-503-01
2000 2000 2000 2000
32
Operation
Resetting
The staple/fold
Set the stapler.
motor (M7) and
the slide motor
(M8) will stop.
Normal operation
Replace the staple
will continue;
cartridge; or, set it
however, opera-
correctly.
tion is subject to
instructions from
the host machine.
The sheet will be
—
aligned based on
maximum size
width and deliv-
ered as a stack.
The sheets will be
—
delivered with
stapling.
Normal operation
Remove the
will continue.
sheets from the
delivery tray.
Normal operation
Remove the stack
will continue.
from the bind
tray.
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:11 PM
Advertisement
