Advertisement
CHAPTER 2 OUTLINE OF OPERATION
7 Detecting Jams
7.1 Outline
The microprocessor (CPU) on the finisher controller PCB is programmed to check for
jams in the finisher/saddle/puncher (option) at such times as set in advance. It identifies a
jam in reference to the presence/absence of paper at a specific sensor. If a jam is found, the
finisher controller PCB communicates the nature of the jam to the host machine in the form
of a code (which may be checked in service mode of the host machine).
PI1: inlet sensor.
PI10 Folding position sensor
2-60
COPYRIGHT © 2001 CANON INC.
Chap02.p65
PI1
F02-701-01
2000 2000 2000 2000
60
PI10
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3/28/01, 12:07 PM
Advertisement
