Advertisement
3) Remove the two E-rings [6] to remove
the staple jam releasing gear [7], timing
belt [8], and relay gear 1 [9]. Remove
the spacer and spring at the back of the
staple jam relasing gear.
4) Remove the screw [10] and spring [11]
to remove the belt tentioner [12].
5) Remove the timing belt [13].
6) Remove the E-ring [14] to remove the
staple position check gear [15].
COPYRIGHT © 2001 CANON INC.
Chap03.p65
[11]
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
9
CHAPTER 3 MECHANICAL SYSTEMS
[7]
[6]
F03-102-05
[15]
F03-102-06
3/28/01, 12:09 PM
[8]
[9]
[10]
[12]
[14]
[13]
3-9
Advertisement
